Waste bins and wiping paper dispensers

The range consists of:

• Waste bins
• Mini wall bin
• Centre feed dispenser
• Floor /wall standard
  
  

Waste bins

The representative waste bins of Vendor can be suspended on the wall or placed on the floor. The standard bin has a plastic lid, but waste bins are also available with a sealed, hinged lid.

The paper bins are available in two models: a low bin of about 50 cm and a high bin of about 70 cm. Both are produced in white-coated metal. The square shape gives a large capacity.


Art.no. 1505L (high bin)
Art.no. 1505H (low bin)

Mini wall bin

The mini wall bin is designed for attachment to the wall and is particularly suitable for sanitary waste in washrooms. Possibly in combination with the sanitary bag dispenser for toilets where a replacement service for sanitary disposal bins is not possible. Blockage of the toilet by sanitary towels or tampons is thereby avoided. The mini bin is also suitable for use as a small waste bin in toilet areas, hotel rooms, kitchens etc.

The mini wall bin is charged with leak-proof paper bags. These perfectly fitting bags are easy to replace and clean to use.

Advantages

• Sealable with lid
• Easy replacement of free-standing bags
• Representative
  
  

The mini wall bin is available in the following product lines:

Centre feed dispenser

The solid plastic centre feed dispenser is charged with wiping paper. This makes it suitable for (among other places) canteens, kitchens and industrial environments. This convenient 'centre feed' dispenser (paper is pulled out from the inside) has a transparent grey cap so that the content level is always clearly visible.

The centre feed dispenser is available in 2 sizes: a small dispenser of 19 cm diameter and a large dispenser of 24 cm diameter.

 
Art.no. 1572W (maxi)
Art.no. 1577W (midi)

Floor /wall standard

The floor and wall standards are wiping paper dispensers suitable for bulk use of wiping paper.

These dispensers can be charged with different types of wiping paper of varying dimensions, up to 1000 metres per roll. The floor and wall standards have a milled edge so that the paper can be easily be torn off. They are produced in metal.

Art.no. 1570 Wall standard
Art.no. 1571 Floor standard